3 Axle 50 Ton Bulk Cement Tanker will export to Uruguay

The Uruguayan customer is the purchasing manager of a cement tank factory. Due to business expansion, customers want to buy buk cement tanker trauker for cement transportation. Uruguay customers learned about bulk cement tanker through Google our official website. So the customer left a message on our website and left his contact information.

After our sales manager Kevin Huang contacted the customer, the customer asked some questions about bulk cement tanker trailer. Sales manager Kevin Huang introduced the issue about bulk cement tanker trailer in detail and showed the details and advantages of Youcan's bulk cement tanker trailer. According to customer needs, it is recommended that customers use 2 axle 50 ton bulk cement tanker trailer. Now the 2 axle 50 ton bulk cement tanker trailer has been completed and is ready to be launched in Uruguay.

Bulk cement tanker trailer is a special container or tank for transporting bulk cement and other bulk products (dry mix, mineral powder, lime, quartz sand, etc.). Use bulk cement tanker trailer to transport cement and dry mix from manufacturers (cement plants, warehouses) to consumers (construction companies, regional cement warehouses, etc.).

Bulk cement tanker trailer is a highly specialized tank, a special type of specialized equipment necessary for transporting bulk materials over any distance and in any climatic conditions.

Bulk cement tanker trailer for sale uses submerged arc welding technology. The welding current used is large and the corresponding input power is large. Coupled with the heat insulation effect of flux and slag, the thermal efficiency is high and the penetration depth is large. The bevel of bulk cement tanker trailer can be smaller, reducing the amount of filling metal. Single wire submerged arc welding can penetrate 20mm at a time without beveling the workpiece.

The welding speed is high. Taking butt welding of steel plates with a thickness of 8 to 10 mm as an example, the speed of single-wire submerged arc welding can reach 50 to 80 cm/min, improving efficiency.

Bulk cement tanker trailer The presence of flux can not only isolate the contact between the molten metal and the air, but also make the molten pool metal solidify more slowly. There is more time for metallurgical reaction between the liquid metal and the molten flux, which reduces the possibility of defects such as pores and cracks in the bulk cement tanker trailer weld.

Flux can also add some alloying elements to the weld metal to improve the mechanical properties of the weld metal.

When welding in a windy environment, submerged arc welding provides better protection than other arc welding methods.

During automatic welding, the welding parameters can be kept stable through automatic adjustment. Compared with manual arc welding, the dependence of welding quality on the skill level of the welder can be greatly reduced.

The spraying process of Youcan bulk cement tanker trailer first removes oil and then sandblasts and removes rust. It is required that the powder must be sprayed within an hour. If left for too long after sandblasting and rust removal, the tank and the frame will be oxidized again, which means that it will be re-oxidized. Rust will affect the final adhesion and the entire spraying effect. Immediately after powder spraying, bake at 230 degrees high temperature.

This kind of semi trailer was designed with lots of advantages and features. If you want to get more information, please don't hesitate to make contact with us.